Installation Method of Parking Heater Integrated Unit And Split Unit

- Sep 28, 2020-

   According to the voltage classification, the parking heater can be divided into two types: 12v and 24v. According to the appearance classification, it can be divided into an integrated machine and a split machine.

   All-in-one installation method:

   The all-in-one machine is easy to install, and it can be used when the oil is connected to the power supply (it is free of installation). Note: The exhaust pipe needs to be connected to the outside of the car, otherwise it is strictly prohibited.


Portable Air Heater


Portable Air Heater


Portable Air Heater


   

Click on the picture to see more details


   Split machine installation method:

  Choose the installation location, fix the host bracket, and fix the host. The host must be placed horizontally with the exhaust downward. Use an electric drill to drill holes and then fix the machine, and connect the exhaust pipe, intake pipe, oil pump switch, oil tank, etc. according to the instructions.


air parking heater


air parking heater
air parking heater


Click on the picture to see more details


  When installing the oil pump, you need to pay attention. It cannot be installed horizontally. It must be installed at an angle. The angle of the oil pump outlet should be 35 degrees to 45 degrees, with the oil outlet facing upwards. (The direction of the oil pump with the plug is the oil outlet). Marked, and then fixed.

  Power supply: heater power supply, the heater can be directly connected to the positive and negative poles of the battery, no need to destroy the original car line, install the remote control, manual switch, be sure to unplug the fuse during installation, and plug in the fuse after installation to avoid wiring A short circuit occurs.

  Note: The exhaust pipe needs to be connected to the outside of the car, otherwise it is strictly forbidden to use it.