How To Install The Parking Heater?

- Nov 11, 2020-

  The parking heater can be divided into two types according to the voltage classification, 12v and 24v. According to the appearance classification, it can be divided into an integrated machine and a split machine.

All-in-one installation method:

  The all-in-one machine is easy to install, and it can be used when the oil is connected to the power supply (it is free of installation), note: the exhaust pipe needs to be connected to the outside of the car, otherwise it is strictly prohibited.


split air parking heater


integrated air parking heater



Split machine installation method:

  Choose the installation location, fix the host bracket, and fix the host. The host must be placed horizontally with the exhaust downward. Use an electric drill to drill holes and then fix the machine, follow the instructions to connect the exhaust pipe, intake pipe, oil pump switch oil tank, etc.

  When installing the oil pump, you need to pay attention to it. It cannot be installed horizontally. It must be installed at an angle. The angle of the oil pump outlet should be 35 degrees to 45 degrees, with the oil outlet facing upwards. (The direction of the oil pump with the plug is the oil outlet). Marked, then fixed.

  Power connection: heater power supply, the heater can be directly connected to the positive and negative poles of the battery, no need to damage the original car line, install the remote control, manual switch, be sure to unplug the fuse during installation, and plug in the fuse after installation to avoid wiring Short circuit.

Note: The exhaust pipe needs to be connected to the outside of the car, otherwise it is strictly prohibited to use.