6KW E-Gas Hot Water and Warm Air Integrated Heater
1.Application
YFY30-6E/1 Model gas heater (hereinafter referred to as heater) is a special heater for caravan that integrates hot water and warm air. This heater cannot be used in bus or dangerous goods carriers.
2.Technology data
Rated Voltage | DC12V |
Operating Voltage Range | DC10.5V~16V |
Short-term Maximum Power Consumption | 5.6A |
Average Power Consumption | 1.3A |
Gas Heat Power (W) | 200040006000 |
Fuel Consumption (g/H) | 160 320 480 |
Gas Pressure | 30mbar |
Warm Air Delivery Volume m3/H | 287max |
Water Tank Capacity | 10L |
Maximum Pressure of Water Pump | 2.8bar |
Maximum Pressure of System | 4.5bar |
Rated Electric Supply Voltage | ~220V |
Electrical Heating Power | 900W 1800W |
Electrical Power Dissipation | 3.9A7.8A |
Working (Environment) Temperature | -25℃~+80℃ |
Working Altitude | ≤1500m |
Dimensions (mm) | 510×450×300 |
Weight (Kg) | 15.6Kg |
3.Product application show
High quality controller
4.Gas Connection
The heater operating pressure must be in compliance with a 30 Mbar liquefied gas supply. When the gas pipe is cut off, clean the port flash and burrs.The paving of the pipe must make the heater easy to disassemble for maintenance work. Use high-pressure air to purge internal debris before installing the gas pipe. The turning radius of the gas pipe is not less than R50, and it is recommended to use elbow pipe to pass the joint of right angle.
The gas interface be truncated or bent. Before connecting to the heater, make sure that the gas line is free of dirt, shavings, etc. The gas system must comply with the technical, administrative, and legal regulations of the country. Anti-collision safety valve (optional) To ensure safety during driving, it is recommended to install a crash safety valve that must be installed after the liquefied gas tank regulator. when Impact, tilting, the anti-collision safety valve automatically cuts off the gas line.